This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Find out more here.

Find out more here

General overview

User modules are developed to run special applications in Conel router not presented in standard router firmware. The user module application enlarges and complements the standard router functionalities. All user modules are compatible with the v2 and v3 router line ER75iv2, UR5v2, UR5iv2, UR5iv2 Libratum, LR77v2, LR77v2 Libratum, CR10v2, Bivias v2, UCR 11 v2, SmartFlex.

If already existing modules do not cover your application needs you can program your own user module on yourself. We are ready to support you in this issue. User module programming, translation and uploading to router FW are described in the Application programmer guide.

* These files are only available to registered users. Login or register.

How to install the user module?

It is easy. Modules are installed through a standard web interface of the router. The installation procedure is an intuitive and comprehensible process. Clicking on the “User module” item in the menu of v2 router you can add/delete or configure user modules in your router.

How does it work?

User modules are reserved for 2 MB memory space inside the FLASH memory of router. This memory part is not overwritten or deleted during the firmware update procedure. This memory space is connected to the do /opt directory. The inside /opt directory is saved in separate directories for every user module.

User modules can use to save data the resistant 128 kB magnetic memory (MRAM) that is connected to the directory /var/data. Every module can create its own sub-directory imide the MRAM relating to its user module name. If you need more detailed information concerning software user modules in Conel routers please contact technical support.

Band Select - adjust the portfolio of frequency bands which Conel router supports

Band Select module allows user to adjust the portfolio of frequency bands which Conel router supports. Please note – this user module is intended only for routers with GSM modules: • PHS8 (i.e. UR5i v2 and UR5i v2 Libratum) • MC7710 (i.e. LR77 v2) • MC7304 (i.e. LR77 v2 and Bivias v2 LL/LH/LC)

  • User Module - Band Select (26 kB, TGZ) * (file is available after logging in)
  • Band Select Application note 20140926 (1 529 kB, PDF) * (file is available after logging in)

* These files are only available to registered users. Login or register.

GPS - allows your router to provide location and time information in all weather...

The user module GPS (Global Positioning System) allows your router to provide location and time information in all weather, anywhere on or near the Earth, where there is an unobstructed line of sight to four or more GPS satellites.

The user module is compatible with UR5i v2F and LR77v2F routers.

  • User Module - GPS (46 kB, TGZ) * (file is available after logging in)
  • GPS Application note 20150420 (4 473 kB, PDF) * (file is available after logging in)

* These files are only available to registered users. Login or register.

wM-BUS Concentrator - allows your router to receive messages from wireless M-BUS meters...

This module allows your router to receive messages from wireless M-BUS meters and then saves the contents of these messages to a XML file. The WM-BUS Concentrator only processes messages received from the meters that are included in the list (adding meter to the list is described in section 1.2). The XML file is generated for each meter once per day. Other messages from the same meter on the same day are ignored. The generated files are saved to a temporary folder and then the user module moves these XML files to the FTP server. Files are stored in a temporary folder until they are successfully transferred to the FTP server.

  • User Module wM-Bus Concentrator (27 kB, TGZ) * (file is available after logging in)
  • wM-BUS Concentrator Application note 20141009 (1 642 kB, PDF) * (file is available after logging in)

* These files are only available to registered users. Login or register.

WiFi AP - allows functionality of expansion PORT XC-WiFi, part of FW since 4.0.0

User module “WiFi” allows for the functionality of expansion PORT XC-WiFi. WiFi module supports the AP (Access Point) function. This module allows you to scan the neighboring networks. Due to the WiFi module it is possible to perform automatic configurations of the connected devices (maximum number is 2007) via DHCP server. More information is in the user manual for XC-WiFi.

Please note – part of FW since 4.0.0

  • User Module - Wi-Fi AP (1 183 kB, TGZ) * (file is available after logging in)

* These files are only available to registered users. Login or register.

WiFi STA - allows functionality of expansion PORT XC-WiFi

User module “WiFi” allows for the functionality of expansion PORT XC-WiFi. This module allows your router to behave as a classical WiFi client station, which is a child element of the infrastructure wireless network. Thus the described device (with this function) can be simply called a “reciever“. Quotes of reciever word mean that wifi communication of this device is bidirectional, which means that the router is also able to send data packets. Therefore the basic function is to receive data packets from an available access point and send data from the cable connection via wifi network. More information is in the user manual for XC-WiFi.

Please note – part of FW since 4.0.0

  • User Module - Wi-Fi STA (1 175 kB, TGZ) * (file is available after logging in)
  • WiFi STA Application note 20140722 (1 886 kB, PDF) * (file is available after logging in)

* These files are only available to registered users. Login or register.

Captive Portal - provides on routers functioning as a standard Wi-Fi hotspot

This module is designed to provide a service called captive portal on routers functioning as a standard Wi-Fi hotspot. It means that every customer using this Wi-Fi network is redirected to a special web page before a common use of the Internet. It is possible to insert a form for authentication or any information notice. Please note that this module is compatible only with firmware 4.0.0 or later in v2 routers!

  • Captive Portal Application note 20141006 (1 624 kB, PDF) * (file is available after logging in)
  • User Module - Captive Portal (641 kB, TGZ) * (file is available after logging in)

* These files are only available to registered users. Login or register.

Cumulocity - support of cloud-based subscription service

Cumulocity is a cloud-based subscription service designed for creating Internet of Things (IoT) solutions. It gives you very fast visibility and control over your remote devices.

  • User Module - Cumulocity (702 kB, TGZ) * (file is available after logging in)
  • Cumulocity Agent Application note 20141104 (1 983 kB, PDF) * (file is available after logging in)

* These files are only available to registered users. Login or register.

Daily Reboot - scheduled daily router reboot

Daily Reboot user module allows to do scheduled daily router reboot at the specified time.

  • User Module - Daily Reboot (14 kB, TGZ) * (file is available after logging in)
  • DailyReboot Application note 20141007 (1 447 kB, PDF) * (file is available after logging in)

* These files are only available to registered users. Login or register.

Ethernet Port Detector - detect physical disconnection of an Ethernet cable and drop eth0 interface

This module allows router to detect physical disconnection of an Ethernet cable and drop eth0 interface so that after the cable is reconnected, it is not possible to communicate via the Ethernet interface.

  • User Module - Ethernet Port (327 kB, TGZ) * (file is available after logging in)
  • Ethernet Port Detector Application note 20141009 (1 590 kB, PDF) * (file is available after logging in)

* These files are only available to registered users. Login or register.

File Uploader - synchronizing files between the router and a remote device

This module is designed for synchronizing files between the router and a remote device (FTP server).

  • User Module - File Uploader (172 kB, TGZ) * (file is available after logging in)
  • File Uploader Application note 20150210 (1 612 kB, PDF) * (file is available after logging in)

* These files are only available to registered users. Login or register.

GPRS Configuration - set the same GPRS/UMTS parameters

This module allows user to set the same GPRS/UMTS parameters for each profile in the router at the same time.

  • User module - GPRS Configuration (13 kB, TGZ) * (file is available after logging in)
  • GPRS Configuration Application note 20141007 (1 524 kB, PDF) * (file is available after logging in)

* These files are only available to registered users. Login or register.

HTTP Authentication - add the process of authentication to a server

With this module you can add the process of authentication to a server that does not provide this service. After clicking the HTTP Authentication module in the web interface, you can find the form, which allows you to activate this module, set necessary information about the server and required login data.

  • User Module - Http Authentication (14 kB, TGZ) * (file is available after logging in)
  • HTTP Authentication Application note 20141007 (1 541 kB, PDF) * (file is available after logging in)

* These files are only available to registered users. Login or register.

HTTP Banner - allows user to embed information banner

This module allows user to embed information banner ahead of the login form.

  • User Module - Http Banner (14 kB, TGZ) * (file is available after logging in)
  • HTTP Banner Application note_20141008 (1 443 kB, PDF) * (file is available after logging in)

* These files are only available to registered users. Login or register.

Mini Captive Portal - provides on routers functioning as a standard Wi-Fi hotspot (older version of Captive Portal)

This module is designed to provide a service called captive portal on routers functioning as a standard Wi-Fi hotspot.

Please note: User module is compatible with v2 routers, firmware lower than 4.0.0 only! For firmware 4.0.0 and higher, use Captive Portal user module.

  • User Module - Mini Captive Portal (106 kB, TGZ) * (file is available after logging in)
  • Mini Captive Portal Application note 20141001 (1 575 kB, PDF) * (file is available after logging in)

* These files are only available to registered users. Login or register.

Modem Bonding - allows you to induce a communication model between several Conel routers

This user module allows you to induce a communication model between the several Conel routers (max. 20) in which the bonded connectivity of all routers in the chain is available on one router (master). The first device (router) in the chain has the role of master and bonded connectivity is available on its ETH port. Following routers are slaves. Master and slaves are wired together from PORT1 to ETH, so that the last Slave has only ETH connected.

  • User Module - Modem Bonding (481 kB, TGZ) * (file is available after logging in)
  • Modem Bonding Application note 20140929 (2 429 kB, PDF) * (file is available after logging in)

* These files are only available to registered users. Login or register.

NMAP - TCP and UDP scan

This module allows user to perform TCP and UDP scan. It can also be used for sending pings (i.e. IP datagrams, which are intended to verify the functionality of a connection between two network interfaces).

  • User Module - NMAP (393 kB, TGZ) * (file is available after logging in)
  • NMAP Application note 20141007 (1 596 kB, PDF) * (file is available after logging in)

* These files are only available to registered users. Login or register.

NTRIP Client - more accurate location via NTRIP protocol

This module is used to gain a more accurate location via NTRIP protocol (it’s a general stateless protocol based on the protocol HTTP/1.1.). Each router which has enabled the user module can be considered as Ntrip Client.

  • User Module - NTRIP Client (36 kB, TGZ) * (file is available after logging in)
  • NTRIP Client Application note 20141008 (1 607 kB, PDF) * (file is available after logging in)

* These files are only available to registered users. Login or register.

Packet Splitter - allows duplication of data flow to more targets

Packet Splitter module allows duplication of data flow to more targets (up to 7 different connections). It is suitable for applications where duplication of data flow is needed – e. g. data collecting for statistic reasons, or sending data from bar code reader to more targets, etc.

  • User Module - Packet Splitter (20 kB, TGZ) * (file is available after logging in)
  • Packet Splitter Application note 20141009 (1 703 kB, PDF) * (file is available after logging in)

* These files are only available to registered users. Login or register.

pduSMS - sending SMS messages in PDU

Module for sending SMS messages in PDU format.

  • User Module - pduSMS (15 kB, TGZ) * (file is available after logging in)
  • pduSMS Application note 20141027 (1 482 kB, PDF) * (file is available after logging in)

* These files are only available to registered users. Login or register.

Pinger - manually or automatically verify the functionallity of the connection

This module allows your router to manually or automatically verify the functionallity of the connection between two network interfaces. Pinger periodically sends IP datagrams and waits for a response from a counterpart. If the response is successfully received, the module prints latency and the statistical summary in conclusion.

  • User Module - Pinger (23 kB, TGZ) * (file is available after logging in)
  • Pinger Application note 20141008 (1 557 kB, PDF) * (file is available after logging in)

* These files are only available to registered users. Login or register.

PoSConf - send the content of the memory card to a remote FTP server

This module allows your router to send the content of memory card to a remote FTP server. The data is sent once a day at the hour that you set in advance. At this point, the memory card is disconnected from the USB. After the module sends all of the data, the memory card is connected to the USB again and is accessible like all other USB flash memory for the storage of data. Each subsequent day this process will be repeated.

  • User Module - PoSConf (101 kB, TGZ) * (file is available after logging in)
  • PoS Configuration Application note 20141007 (1 435 kB, PDF) * (file is available after logging in)

* These files are only available to registered users. Login or register.

Send Report - sending of System log and Report files to specified email address

This module allows regular sending System log and Report files to the specified email address or FTP server. System log contains system log statement. This is the same file, which can be obtained by pressing the Save Log button on the page with system log in the web interface of the router.

  • User Module - SendReport (94 kB, TGZ) * (file is available after logging in)
  • SendReport Application note 20141008 (1 484 kB, PDF) * (file is available after logging in)

* These files are only available to registered users. Login or register.

SSH client - SSH client

This module extends the portfolio of Conel router functions by the ability to use it as an SSH client. This means that the module allows to establish the SSH connection to the remote router and execute commands on it. Due to the fact the SSH server is a standard part of the firmware, it is possible to connect to any Conel router.

  • User Module - SSH client (180 kB, TGZ) * (file is available after logging in)
  • SSHclient Application note 20141009 (1 609 kB, PDF) * (file is available after logging in)

* These files are only available to registered users. Login or register.

TCP SYN Keep-Alive - check TCP connection to specified IP address

This module allows your router to check the TCP connection to specified IP address (on the stated TCP port). Establishing a connection is carried out regularly at the specified interval. Any failed attempts to establish a TCP connection are recorded. If the number of fails exceeds the set limit, the WAN connection will be restarted.

  • User Module - TCP SYN Keep-Alive (13 kB, TGZ) * (file is available after logging in)
  • TCP SYN Keep-Alive Application note 20141008 (1 478 kB, PDF) * (file is available after logging in)

* These files are only available to registered users. Login or register.

WoL Gateway - eavesdrop on communication on the specified UDP port

This module allows your router to eavesdrop on communication in the specified UDP port, receives packets from specified source address (Source IP) and forwards these packets to the appropriate address (Destination IP) as a broadcast.

  • WoLGateway (14 kB, TGZ) * (file is available after logging in)
  • WoL Gateway Application note 20141020 (1 472 kB, PDF) * (file is available after logging in)

* These files are only available to registered users. Login or register.

AT Modem Emulator - implementation of emulation telephone modem behavior

The AT Modem Emulator user module to emulate telephone modem behavior. The modem can receive a dial-up request via the serial port and convert it to a TCP/IP connection. A device connected to the Conel router serial interface sees the router as a HAYES-compatible modem.

  • User Module - AT ModemEmulator for v2 routers (27 kB, TGZ) * (file is available after logging in)
  • User Module - AT ModemEmulator for v3 routers (28 kB, TGZ) * (file is available after logging in)
  • AT Modem Application Note 20150602 (2 466 kB, PDF) * (file is available after logging in)

* These files are only available to registered users. Login or register.

DNP3 Outstation - implementation of DNP3 protocol

DNP3 Outstation module allows the router to use DNP3 protocol (Distributed Network Protocol v3), which is intended for reading data from the router. It follows that the primary purpose of this protocol is the mutual communication between devices in a network.

  • User Module - DNP3 Outstation (45 kB, TGZ) * (file is available after logging in)
  • DNP3 Outstation Application note 20141009 (1 968 kB, PDF) * (file is available after logging in)

* These files are only available to registered users. Login or register.

Easy VPN Client - provides secure (encrypted) connection LAN

User module Easy VPN client provides secure (encrypted) connection LAN under our router and LAN under Cisco router.

  • User Module - EasyVPN (305 kB, TGZ) * (file is available after logging in)
  • EasyVPN client Application note 20141007 (1 485 kB, PDF) * (file is available after logging in)

* These files are only available to registered users. Login or register.

pppGateway - allows the router to establish connection via PPP

This module allows the router to establish connection via PPP (data link protocol commonly used in establishing a direct connection between two networking nodes) between router and device which is connected to the router over a serial line. For example, this way it is possible to provide Internet access for older devices which do not have this ability, but have the use of connection over a serial line.

  • User Module - pppGateway (17 kB, TGZ) * (file is available after logging in)
  • pppGateway Application note 20141008 (1 600 kB, PDF) * (file is available after logging in)

* These files are only available to registered users. Login or register.

Protocol ALPHA-MODBUS - communications protocol with Mitsubishi ALPHA

ALPHA-MODBUS protocol is binary transparent serial communications protocol with Mitsubishi ALPHA. Direction to/from the control room uses MODBUS-TCP protocol, on the serial line protocol there is the proprietary machine ALPHA (Dedicated Protocol). The router performs a real-time two-way conversion transparent scroll via the data.

  • User Module - Protocol ALPHA-MODBUS (40 kB, TGZ) * (file is available after logging in)
  • ALPHA-MODBUS application note 20150123 (1 507 kB, PDF) * (file is available after logging in)

* These files are only available to registered users. Login or register.

Protocol BGP - implementation of routing protocol

Due to this module the routing between autonomous systems can be used. These systems are basically collections of IP networks and routers under the control of one or more network operators that presents a common clearly defined routing policy (only one of the interior gateway protocols). The routing information is exchanged between autonomous systems via a border gateway. The BGP user module is based on software called Quagga. It is a routing software package that provides TCP/IP based routing services with routing protocols support RIP, OSPF and BGP.

  • User Module - Protocol BGP (497 kB, TGZ) * (file is available after logging in)
  • BGP Application note 20141007 (1 671 kB, PDF) * (file is available after logging in)

* These files are only available to registered users. Login or register.

Protocol IEC 101-104 - implementation of conversion IEC101-104 protocols

This user module does a bidirectional conversion between IEC101 and IEC104 protocols specified by the IEC 60870-5 standard. IEC101 serial communication is converted to the IEC104 TCP/IP communication and vice versa. It is possible to configure some parameters of IEC101 and IEC104.

  • User Module IEC 101-104 (169 kB, TGZ) * (file is available after logging in)
  • Protocol IEC 101-104 Application Note 20150608 (2 302 kB, PDF) * (file is available after logging in)

* These files are only available to registered users. Login or register.

Protocol IS-IS - allows your router to use IS-IS protocol

This module allows your router to use the IS-IS (Intermediate System – Intermediate System) routing protocol, which is designed for the exchange of routing information between routers. This protocol belongs to a family of IGP (Interior Gateway Protocol) protocols, which are designed to distribute routing information within a single autonomous system (AS). It is a link-state protocol, which means that information about the topology is exchanged between the nearest neighbours in a “flood way“ (flooding).

  • User Module - Protocol IS-IS (303 kB, TGZ) * (file is available after logging in)
  • IS-IS Application note 20141008 (1 512 kB, PDF) * (file is available after logging in)

* These files are only available to registered users. Login or register.

Protocol MODBUS-RTUMAP - periodically read stored values from the buffer

Using this module stored values from the buffer can be periodically read. These values are obtained from connected meters. Each meter is assigned a certain number of registers (or coils). The ranges follow each other, so the rtuMap module reads the data from a total number of assigned registers (or coils) from the specified start address.

  • User Module - Protocol MODBUS-RTUMAP (26 kB, TGZ) * (file is available after logging in)
  • RTUMAP Application note 20141007 (1 586 kB, PDF) * (file is available after logging in)

* These files are only available to registered users. Login or register.

Protocol MODBUS-TCP2RTU - convert protocol MODBUS TCP to protocol MODBUS RTU

User module provides convert protocol MODBUS TCP to protocol MODBUS RTU, which is possibly run on the serial line. Serial port can be used for the expansion port RS232 or expansion port RS485/422 fitted in PORT1 or PORT2.

* These files are only available to registered users. Login or register.

Protocol NHRP - implementation of dynamic Multipoint VPN

A dynamic Multipoint VPN (DMVPN) is a concept of a secure network that exchanges data between remote routers (so called spokes) without needing to pass traffic through a headquarter virtual private network (VPN) router (so called hub). Each spoke is permanently connected to the headquarter using VPN tunnel. If two spokes need to communicate to each other, temporary VPN tunnel is created between them (headquarter has a role of NHRP server). Tunnels are canceled after finishing of communication. The DMVPN allows to establish VPN tunnels between routers for which port address are assigned dynamically (this is not possible when using “classical” site-to-site VPN). The DMVPN essentially creates a topology that could be called (full) mesh VPN. This means that each remote router (spoke) can connect directly with all other remote routers, no matter where they are located.

* These files are only available to registered users. Login or register.

Protocol OSPF - OSPF routing protocol available

Due to this module the OSPF routing protocol is available. This protocol is designed for exchanging routing information within an autonomous system. The OSPF is a link state protocol, which means that routers maintain a map of the network (link state database) that is updated after any change to the network topology. To compute the shortest (least cost) path between the router and all the networks the Dijkstra’s algorithm is used. Then this data are filled in the routing table. The OSPF user module is based on software called Quagga. It is a routing software package that provides TCP/IP based routing services with routing protocols support RIP, OSPF and BGP.

  • User Module - OSPF (384 kB, TGZ) * (file is available after logging in)
  • OSPF Application note 20141007 (1 558 kB, PDF) * (file is available after logging in)

* These files are only available to registered users. Login or register.

Protocol PIM-SM - Protocol Independent Multicast

Due to this module the PIM-SM (Protocol Independent Multicast – Sparse Mode) protocol is available. The most commonly used is the multicast routing protocol that is designed with the assumption that the recipients for any particular multicast group will be sparsely distributed throughout the network. In order to receive multicast data, routers must explicitly tell their upstream neighbors about their interest in the particular groups and sources. PIM-SM by default uses shared trees, which are multicast distribution trees rooted in some selected node (this router is called the Rendezvous Point, RP) and used by all sources sending to the multicast group.

  • User Module - PIM-SM (68 kB, TGZ) * (file is available after logging in)
  • PIM-SM Application note 20141007 (1 590 kB, PDF) * (file is available after logging in)

* These files are only available to registered users. Login or register.

Protocol RIP - RIP routing protocol

Due to this module the RIP routing protocol is available. It is a standard for the exchange of routing information among routers and respond to changes in network topology. The RIP is a distance-vector protocol, which means that routers transmit updated routing tables. To compute the shortest (least cost) path between the router and all the networks the Bellman-Ford algorithm is used. The deciding factor is the number of routers through which data must pass between source and destination. The maximum number allowed for the RIP protocol is 15. This maximum, however, also limits the size of networks that the RIP can support. The RIP user module is based on the software called Quagga. It is a routing software package that provides the TCP/IP based routing services with routing protocols support RIP, OSPF and BGP.

  • User Module - Protocol RIP (273 kB, TGZ) * (file is available after logging in)
  • RIP Application note 20141007 (1 552 kB, PDF) * (file is available after logging in)

* These files are only available to registered users. Login or register.

Protocol SuiteHT - implementation of SuiteHt protocol

This module allows the router to send queries from the AMR system to a meter through an IP network using the router as a gateway. AMR system will send commands and these commands will not be encoded or encapsulated, but shall be sent “in clear” over a TCP connection. The router, upon receiving this command, will send it to the meter, following the timings and the handshake process. Once router has received the response message from the meter, it sends it back to the AMR system and waits for another command. If AMR has no more commands to send, it will close the TCP session and the router will have to end the communication with the meter.

  • User Module - SuiteHT (21 kB, TGZ) * (file is available after logging in)
  • Suite HT Application note 20141008 (1 521 kB, PDF) * (file is available after logging in)

* These files are only available to registered users. Login or register.

SCEP Client - implementation of Cisco System’s Simple Certificate Enrollment Protocol

SCEP (Cisco System’s Simple Certificate Enrollment Protocol) is a PKI communication protocol which leverages existing technology by using PKCS#7 and PKCS#10. SCEP is the evolution of the enrollment protocol developed by Verisign, Inc. for Cisco Systems, Inc. It now enjoys wide support in both client and CA implementations.

  • User Module - SCEP Client (29 kB, TGZ) * (file is available after logging in)
  • SCEP Client Application note 20141111 (1 489 kB, PDF) * (file is available after logging in)

* These files are only available to registered users. Login or register.

Serial2TCP - allows connecting of the serial line device and TCP Server or Servers

Serial2TCP module allows connecting of the serial line device and TCP Server or Servers. Communication in both ways – serial to TCP and TCP to serial – is possible. It can be used in data collecting and measurement applications – sending data from serial line connected meter or sending commands and control data to any meters or serial line devices remotely via TCP.

  • User Module - Serial2TCP (20 kB, TGZ) * (file is available after logging in)
  • Serial2TCP Application note 20140930 (1 561 kB, PDF) * (file is available after logging in)

* These files are only available to registered users. Login or register.

Stunnel - allows the router to create an encrypted network tunnel

This module allows the router to create an encrypted network tunnel in which it applies that at one end – either the input or output – data is wrapped in SSL. This means that the data on the input is either encrypted, then it is decrypted on the output, or vice versa. Stunnel is primarily designed for adding SSL encryption to communication channels that can not support it. This results in a significant increase in communication security (within these channels). It can be used as an additional functionality for the commonly used servers, which are running by inetd daemon (Linux daemon which listens to communication on the network interface and if it is necessary, runs servers for handling requirements). These have included POP2, POP3 or IMAP. Thanks to this module it is also possible to add SSL encryption to NNTP, SMTP and HTTP services which are run by standalone daemons or to PPP tunnels.

  • User Module - Stunnel (655 kB, TGZ) * (file is available after logging in)
  • Stunnel Application note 20150306 (4 710 kB, PDF) * (file is available after logging in)

* These files are only available to registered users. Login or register.

Transparent Mode - implementation of Transparent Mode

After loading the user module into any Conel router, this router becomes “invisible” for remote devices. It is available only for a device which is located behind the router. The default IP address of the router is 192.168.1.1 (configuration can be performed only by logged in user – name and password is root by default). All communication with the device which is located behind this router runs directly. This means that if a user enters the IP address of the SIM card in the router, will communicate with the interface of the device behind this router.

  • User Module - Transparent Mode (2 kB, TGZ) * (file is available after logging in)
  • TransparentMode Application note 20141009 (1 677 kB, PDF) * (file is available after logging in)

* These files are only available to registered users. Login or register.

Advanced Security - ability to set the number of additional security features

Advanced Security module extends configuration of Conel router of ability to set the number of additional security features. These include for example disabling (or enabling) sending error messages within the ICMP protocol, disabling (or enabling) the ICMP protocol as a whole, disabling (or enabling) access to the router via Telnet or SSH etc.

  • User Module - Advanced Security (17 kB, TGZ) * (file is available after logging in)
  • Advanced Security Application note 20141013 (1 739 kB, PDF) * (file is available after logging in)

* These files are only available to registered users. Login or register.

Guest - restricts of configuration via the web interface

This module restricts configuration via the web interface of the router for normal users. Configuration in standard form is accessible only to users who have administration permission (i.e. know username and password).

  • User Module - Guest (23 kB, TGZ) * (file is available after logging in)
  • Guest Configuration Application note 20141007 (1 874 kB, PDF) * (file is available after logging in)

* These files are only available to registered users. Login or register.

Application programmer guide

* These files are only available to registered users. Login or register.

Application guides - notes
  • QoS Application guide 20140515 (1 431 kB, PDF) * (file is available after logging in)
  • VLAN Application note 20140825 (1 494 kB, PDF) * (file is available after logging in)
  • Commands and Scripts Application guide for Conel routers v2 v3 20141216 (1 643 kB, PDF) * (file is available after logging in)
  • IPsec Application note 20150217 (5 542 kB, PDF) * (file is available after logging in)

* These files are only available to registered users. Login or register.

Support of SNMP protocol
  • SNMP OID Application note 20140827 (1 683 kB, PDF) * (file is available after logging in)

* These files are only available to registered users. Login or register.

MIB files are possible to download here.

Start typing and press Enter to search

Contact us

* required fields




Please complete all required fields.
The form has been successfully submited.
Server Error. Try to send the request later.

Yandex.Metrica